Square Earring Pod Mould

Square Earring Pod Mould

Oval Pendant Mould

Oval Pendant Mould 4pc

Circle Earring Pod Mould

Rating:
80% of 100
£19.65 £16.37
6 in stock
SKU
J018
Circle Earring Pod Mould  

Create elegant jewellery with ease using this mould.  

Use it to make the smallest and thinnest of circular gems that work well for jewellery, especially earrings and accent pieces.

Mould Size: 14.5cm x 14.5cm x 1cm. Pod Size: 1.9cm x 0.6cm. Fits in both the HotStart Pro and SC2 kilns.

Will this mould fit in my kiln?

16 pods in a mould.

We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.

When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:

Filling a glass casting mould

See the Small Pod Mould Guide pdf for more details. This schedule is a guideline and you should adjust it to suit your particular kiln, or for different thicknesses of glass:

Phase  Rate (C/hr)  Temp.  Hold (mins)
1 176C 676C 10
2 999 775C 10-20
3 999 515C 30-60
4 30 370C  -

Why not also try the Square or Teardrop Earring Pod Moulds?

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. 

All our moulds are designed for multiple use and with care should last for many firings.
Write Your Own Review
You're reviewing:Circle Earring Pod Mould
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
Small_pod_mould_guide (277.09 kB)
mouldcare (401.93 kB)
We found other products you might like!