Indulge in some Gothic style, or make great Christmas decorations or religious wall hangings with this simple to use mould.
Outside Dimensions: 10cm x 8cm x 2cm Inside Dimensions: 8cm x 6cm. Fits in the Firebox 8 and Paragon SC2 kilns.
We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.
When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:
See the Small Pod Mould Guide pdf for more details. This schedule is a guideline and you should adjust it to suit your particular kiln, or for different thicknesses of glass:
|Phase||Rate (C/hr)||Temp.||Hold (mins)|
Goes perfectly with the Cross Pendant Mould.
Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm.