A step up from the popular Hobbyfuser, this British built kiln has a large chamber and recessed floor to give extra depth to the kiln chamber. A must for the serious glass worker and perfect for schools due to the robust build and reliability. This is the latest offering from Kilncare, and you can expect the same solid build and high attention to detail in the design of this UK manufactured kiln that made the Hobbyfuser such a success. Free 4 year manufacturer's warranty.
If you find this kiln cheaper elsewhere - let us know and we will match it!
Buy today to receive these fantastic benefits
|Gold Loyalty Discount Status - 15% off future orders|
|Free Glass Coaster Starter Kit (sent separately from the kiln)|
|Unlimited lifetime technical support|
|Free delivery of your kiln to Mainland UK|
|4 year manufacturer's warranty - including elements|
• 32 programs - each with up to 32 segments
• Each segment is a controlled heating/cooling ramp soak
• Soak times up to nearly 100 hours
• Ramp rates from 1 to 999°C/hour full
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 4 days
• Power failure recovery
• Energy used display
• Event / Damper / Fan relay output
• Alarm relay with alarm buzzer
• Mains power switch
This kiln requires the installation of a circuit breaker. This should be fitted by a qualified electrician. We recommend you check the power supply to your kiln's location is suitable before purchasing.
Will fit through minimum door width of 90cm (with minor disassembly)
The kiln is equipped with high performance, hard-wearing infra-red quartz elements and well-designed insulation. It has a fast react thermocouple and is also fast cooling. The elements are located in the lid for even heating; this also makes them easy to replace if required. The elements are switched off when the lid is opened by an automatic safety switch.
The lid is made from stainless steel: powder coated and oven baked. It is lined out with press cut, non-ceramic fibre. This eliminates the risk of brick dust particles dropping from the lid, making for a very clean firing environment. The lid construction enables the Pro-fuser to retain the heat when needed but still release heat rapidly during the all-important cool-down period.
The lid stays open once lifted, leaving you with both hands free to load or unload the kiln. There are also two handles for left or right hand lifting and a catch to hold the lid closed.
In the centre of the lid is a large spy/vent hole with spring return, anti dust flap - great for keeping an eye on your firing.
The base section of the chamber is made from lightweight refractory brick and is recessed to provide extra height to the chamber.
The Pro-fuser Deep comes with the KCR32C programmer which is a multi-program controller targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs (which can be over-written).
Optional WiFi Controller Upgrade – Contact Customer Services for more details.
This kiln is available with an optional upgrade to the KCR32CWIFI controller.
The KCR32CWIFI is the same as the standard KCR32C, but in addition it offers real time kiln monitoring from anywhere in the world with an internet connection. The is enables the user to be able to view what the present status and temperature the kiln is, where it is in the given program, review the program, view error faults and manually stop the firing if needed.
For more details on the WiFi features of this controller, see the KCR32CWIFI Overview information sheet.
This is the Deep version of the Kilncare Pro-fuser, providing a recessed chamber to give another 105mm of internal height. Fantastic for drop-outs or larger castings. The length and width of the kiln remains the same as the original Pro-fuser, but the internal height is increased to 330mm. The total external height increases to 635mm. The power rating remains the same.
The Pro-fuser stand has two shelves, one for the kiln to sit on and one for your own use. It raises the kiln by 650mm to a comfortable height. It is made of steel and is powder coated to match the kiln. The stand is supplied ready for assembly.
820mm x 480mm, with props.
Add castors to the stand to make your kiln easily moveable. A worthwhile extra!
Delivery is to your door only and does not include installation. Please consider that you may need help to situate the kiln. The kiln will be delivered boxed on a pallet measuring 104cm x 168cm.
Ships free to any address in mainland UK.
Deliveries outside the UK: Delivery charges vary. While we subsidise delivery costs where we can, for some destinations we may have to request an extra delivery charge in addition to the one calculated at checkout. If this is the case we will contact you as soon as possible to agree this with you, and always before the kiln is dispatched.
Delivery is usually within 3-4 weeks.
This kiln will fit through minimum door width of 90cm (with minor disassembly)