Fine 220 Diamond Grinder Bit,  3/4

Fine 220 Diamond Grinder Bit, 3/4" (19mm)

CBS Special Edition: Granite Ripple Tropical Rays on Black

CBS Special Edition: Granite Ripple Tropical Rays on Black

Open Hands Mould

Regular Price £53.50 Special Price £42.80 £35.67
More than 10 in stock
Open Hands Mould 
Make a great accessory to any home or a gift for a friend with this modern take on a classic design from Colour De Verre.
This mould is a great first project for a casting beginner. Simply prime, fill the mould with your favourite frit colour and fire to create this lovely design. The finished piece can be left flat or be slumped into a shallow bowl if desired. Remember to place the hands on the slumping mould with the texture facing up if you choose to do this.

We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.

snowflake mould for glass

Finished Pieces: 15cm length

Fill Weight: 250 to 275g in frit. 

External Mould Dimensions: 21cm x 19cm x 4cm

When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:

Filling a glass casting mould

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. All our moulds are designed for multiple use and with care should last for many firings.

Write Your Own Review
You're reviewing:Open Hands Mould
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
Tricks_of_the_Trade (458.41 kB)
Open_Hands (2.19 MB)