Square Slumper with Flat Base Mould 8297 (13.3 x 13.6 x 3.3cm)
Square Slumper with Flat Base Mould 8297 (13.3 x 13.6 x 3.3cm) Square Slumper with Flat Base Mould 8297 (13.3 x 13.6 x 3.3cm) Square Slumper with Flat Base Mould 8297 (13.3 x 13.6 x 3.3cm)
Soap Dish Mould 8441 (10.5 x 15.7 x 2.1cm)

Soap Dish Mould 8441 (10.5 x 15.7 x 2.1cm)

Square Slumper with Flat Base Mould 8295 (17.3 x 17 x 4.1cm)

Square Slumper with Flat Base Mould 8295 (17.3 x 17 x 4.1cm)

Square Slumper with Flat Base Mould 8297 (13.3 x 13.6 x 3.3cm)

£17.60 £14.67
More than 10 in stock
SKU
P015
Small Square Slumper Mould with a Flat Base

This classic mould shape is perfect for making a beautiful glass dish to hold tealights, trinkets and more. The flat base will ensure that your glass doesn’t tilt when using it.

Dimensions:

Inner: 126mm x 126mm and roughly 28mm deep.

Outer: 133mm x 136mm and roughly 33mm deep.

Base: 68mm diameter.

Bullseye Code: 8997

Firing Schedule:

Will this mould fit in my kiln?

Please read: This firing recommendation has been calculated using Bullseye Glass with a thickness of 6 mm in a Paragon GL24 kiln, and is courtesy of Bullseye Glass Co.

Segment

Rate (C/hr)

Temp.

Hold

1

167C

677C

:05

2

999

482C

1:00

3

56C

371C

:00

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. We strongly recommend cutting the glass to the size measured from the actual mould rather than relying solely on the dimensions shown.

All our moulds are designed for multiple use and with care should last for many firings.

Write Your Own Review
You're reviewing:Square Slumper with Flat Base Mould 8297 (13.3 x 13.6 x 3.3cm)
Your Rating
Customer Questions
Can you use this with normal rather than bullseye glass ?

Yes, you can use this mould with other glass that isn't bullseye.

Can I use tigris spray on this?

We strongly recommend using ZYP Boron Nitride Spray with our casting moulds.

Did you find what you were looking for?