The Kilncare Eurofuser Glass Kiln offers high-capacity firing with exceptional temperature consistency, ideal for both hobbyists and professionals.
FREE Mainland UK Delivery.
£6,320.00 ex. VAT
5.0 / 5.0
5 reviewsManufactured in the UK, the solid build and high attention to detail make it one of the best kilns on the market. Ideal for a huge range of techniques including glass fusing, slumping, and casting.
The kiln comes with a 4-year warranty, covering all parts (including elements).
Why buy a kiln from Warm Glass?
We have an experienced team who will support you every step of the way, including free technical help if you need it. Call us on 01934 863344, and we will find the best setup for you. If you find this kiln cheaper elsewhere, please contact us and we'll do our best to match it.
Special features:
Energy Credentials:
*Information based on supplier testing with 6mm Bullseye Glass on a Basic Full Fuse, and will vary slightly between firings. Energy prices calculated using the UK energy price cap of 34p per KwH, correct as of the 1st October 2022.
For advice on choosing a kiln, visit our Glass Kiln Advice Page.
Electrical: 10kw/42amp.
You should check that the power supply is suitable
Single phase or 3-phase and neutral (240V/ 415V N). This kiln will all run on either single phase or three phase as standard and can be changed at any time simply by removing or adding a special link bar (that is provided with the kiln) to the mains connections. This should be done by a qualified electrician.
Maximum Temperature: 960°C.
Dimensions:
Optional Shelf Kit:
A shelf will fit 56 x 10cm coasters.
CE certified.
The KCR32C controller is very intuitive to use and comes with 9 sample programs preinstalled.
Watch our video for how to use the KCR32C controller.
The KCR32CWIFI controller is included as standard for this kiln.
If the kiln is situated in an area with a reliable source of WIFI, the WIFI enabled controller will allow you to view your firing progress and data through the kilncare webpage. This can be accessed via phone, tablet, PC or Mac.
I bought this Kiln several years ago and have found it to be a perfect size for my needs. Would definitely recommend it. Also easy to programme with fantastic results.
I recently purchased the Eurofuser - my first kiln - and have now completed a dozen or more firings. Veronica at Warm Glass gave me lots of good advice and I was confident that help would only be a phone call away if needed, but in fact I found the kiln so straightforward to programme that I was able to get going very quickly on my own. The kiln fires reliably and evenly, producing consistent results each time. This is an excellent kiln and I can thoroughly recommend it - delivery time was much shorter than I expected too!
I have just bought a Eurofuser and I am delighted with it! So easy to use and the pieces look beautiful...A big thank you to Veronica and Simon at Warm Glass for their support with the programming and to Brian at Kilncare for the most superb customer service during the purchase and after sales support.
This is a kiln to seriously consider up-grading to if you own a small starter kiln....and want to take your work to a professional level. Great kiln shelf size for projects that you will still be able to manage single handed. Height within the chamber is even ok for doing pot-melts and aperture pours. Also really good for casting projects. The controller is very straightforward and easy to programme - a delight to work with!
I bought my Eurofuser Kiln with great trepidation having only just discovered the process of kiln formed glass.
It seemed huge to begin with but I knew that it would suit the size of pieces I intended to create.
Once installed I couldn't wait to use it.
The programmer was surprisingly easy to use. And then with a flick of the switch there was a great big satisfying clunk of a noise and it was firing.
The kiln has always performed utterly reliably. It gives off very little heat considering the high temperatures it operates at.
It is easy to load and open thanks to excellent hinges and is a really good working height.
I have some pieces firing at the moment. They should be ready to come out this evening. I can't wait.
It has made all the difference to me to own my own kiln, to be able to use it whenever I wish.
I'm glad I took the plunge and I am delighted with the Eurofuser.
