Menu
Search Search Basket
0
Cart
Casting Plaster - Premium - Warm Glass

Casting Plaster - Premium

SKU: Z-F005A

This premium mould-making material has been successfully used for pâte de verre, kiln-cast and crucible glass casting processes.

£19.00

£15.83 ex. VAT

2 reviews
3 in stock
More details

Product Details

Product Information

Glass Cast 101 Premium Casting Plaster an economical, all-purpose mould material for kiln casting and glass slumping. It has very fine particles, providing the smoothest of surfaces.

This mould material has sufficient strength for most glass castings of small and medium size. It is ideal for open-face moulds and small moulds made using the lost wax process.

Can be mixed with Fibre Glass strands to create a jacket coat with more strength (see the Bullseye Box Casting information sheet for more information).

MIXING RATIO

Plaster/Powder:

Water: 2

Maximum casting temperature: 838C

Always wear a dust mask when handing plaster powder.  Danger. Causes damage to lungs through prolonged or repeated exposure. Contains respirable crystalline silica. See MSDS for more information.

We recommend that the plaster is stored in sealed container in a cool dry place, and used within 12 months of purchase.

2kg makes approximately 1.6 litres of plaster.

Makes a single-use plaster mould. For a mould suitable for multiple firings, try Castalot.

Product Attachments
Health & Safety

Casting Plaster - Premium MSDS

Warning: Warning: This product may cause damage to lungs through prolonged or repeated exposure by inhalation. Do not inhale dust/mist, ventilate work area and wear an FFP3 Dust Mask or P3 Respirator. Clean up with a damp sponge or HEPA Filter Vacuum.

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
D
David Frazer

I've been using this for about 3 months, after using Hydracrist, and found it to be excellent in every way.

It mixes & pours easily leaving very little residue in the plastic jug which makes cleaning up a lot easier.

The detailing it picks up is superb especially if you use slightly more water for an initial slip, before the main pour. However it is also very easy to carve & smooth out all the mistakes I've made on the model!

I've also found it very resilient after burning out PLA models before loading with glass & re-firing, with no broken moulds so far, and some being fired 4 times to 860'C

Great stuff!

S
Sue Broughton

I always use this for my lost wax casting and it holds exquisite detail, I've never had a mould crack and devesting it can be done with a scrubbing brush; what more could you ask, excellent formula.

×