Kilncare Pro-fuser Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Pro-fuser Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Pro-fuser Deep Glass Kiln - FREE MAINLAND UK DELIVERY

Kilncare Pro-fuser Deep Glass Kiln - FREE MAINLAND UK DELIVERY


Built to the same standards as the FK5, but with a larger chamber size.

The FK range is designed to be totally functional, simple and easily to maintain. 

From £9,388.00 £7,823.33

If you find this kiln cheaper elsewhere - let us know and we will match it!

Kilncare FK6.  Larger professional fusing kiln with WiFi enabled digital programmer.  Internal Dimensions: 105cm x 105cm x 26.5cm (LxWxH)  

 Buy today to receive these fantastic benefits

platinum discountPlatinum Loyalty Discount Status - 20% off future orders
free glass coaster kitFree Glass Coaster Starter Kit (sent separately from the kiln)
technical supportUnlimited lifetime technical support
free UK deliveryFree delivery of your kiln to Mainland UK
glass kiln warranty4 year manufacturer's warranty - including elements

The kiln is covered by Kilncare 4 year guarantee on all parts including the elements.

Kiln Shelves:

This kiln is supplied without a shelf, but we sell a 50 cm x 50 cm kiln shelf, four of which would fit this kiln.

Other Information:

The kiln can be split for ease of installation if access is tight.

This kiln requires the installation of a circuit breaker (similar to a cooker socket).  This should be fitted by a qualified electrician.

No shelf kit is supplied.  See 'Kiln Shelves' section above for more information.

4 Year manufacturer's warranty, including elements.

Kilns contribute towards our discount programme but do not qualify to receive discounts. 

For further information about this kiln call our team on 01934 756181.

Check out our page on Choosing a Glass Kiln.

Read our advice on Setting Up Your Glass Kiln.

The lid has gas-strut lid lift assistance to make opening easy.  The kiln opens wide to provide a flat, bench-like surface, making it very easy to place items in the kiln.

The lid seal is held in by a removable stainless steel frame and as such, it is fully replaceable if required, leaving a factory fitted finish that will give years of trouble free use.

The FK6 uses an ultra-fast response Inconel thermocouple and is equipped with Quartz tube, Kanthal A1 "infra-red" element technology.

This kiln contains no ceramic fibre.  The base is made from replaceable, low density brick.

The FK6 comes on a stand with castors as standard.


This kiln requires the installation of a circuit breaker.  This should be fitted by a qualified electrician. We recommend you check the power supply to your kiln's location is suitable before purchasing.

  • Certified CE compliant
  • Power rating 12.0 kW
  • Power supply: This kiln will all run on either single phase or three phase as standard and can be changed at any time simply by removing or adding a special link bar (that is provided with the kiln) to the mains connections. This should be done by a qualified electrician.
  • Kiln does not come with cable but this can be purchased from us at £10 per metre – on request.
  • Maximum Temperature 960ºC.


  • Inner dimensions: 105cm x 105cm 
  • Chamber depth: 26.5cm
  • Outer dimensions: 141 x 155 x 124cm (WxDxH) (including stand)


Kilncare KCR32C Kiln Controller

The FK6 comes with the KCR32CWIFI programmer which is a WiFi enabled multi-program controller targeted towards glass use with 32 programs each of up to 32 segments. Each segment is a controlled heating/cooling ramp followed by a soak. It is supplied pre-programmed with 9 typical glass programs (which can be over-written).


• WiFi enabled controller for remote monitoring of your firings
• 32 programs - each with up to 32 segments
• Each segment is a controlled heating/cooling ramp soak
• Soak times up to nearly 100 hours
• Ramp rates from 1 to 999°C/hour full
• Programs can be reviewed or altered while firing
• Program Pause & Segment Advance facilities
• Keyboard lockable
• Delayed start facility - up to 4 days
• Power failure recovery
• Energy used display
• Event / Damper / Fan relay output
• Alarm relay with alarm buzzer
• Mains power switch

 Chamber Size: The large rectangular chamber is 105 x 105 x 26.5cm.

What you can fit into this kiln:

Largest circle: 105 cm diameter

Largest square: 105 cm x 105 cm

The FK6 is supplied with:

  • The KCR32CWIFI controller
  • Stand (with castors)
Kilncare logo
Write Your Own Review
You're reviewing:Kilncare FK6 Glass Kiln - FREE MAINLAND UK DELIVERY
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
KCR32CWIFI_Overview (477.52 kB)


This kiln is not a stock item, and delivery is usually 6-8 weeks, directly from the manufacturer.

Delivery is to kerbside only and does not include installation. Please consider that you may need help to situate the kiln. 

Delivery is free to Mainland UK. Additional charges may apply if there is restricted access to property.

Deliveries outside the UK: Delivery charges vary. While we subsidise delivery costs where we can, for some destinations we may have to request an extra delivery charge in addition to the one calculated at checkout. If this is the case we will contact you as soon as possible to agree this with you, and always before the kiln is dispatched.  

We found other products you might like!