Make perfect gifts or decorations with this easy to use mould. You can make two different sizes and they only require one firing.
Why not add some dichroic frit or flakes to give some sparkle to your design?
Mould size: 23cm x 12.5cm x 2.5cm (approx.)
Finished pieces are 10cm and 8.4cm across.
Fill weight: 15 grams and 25 grams. Dimensions are 3” and 4”.
When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:
Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm.
We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.
Suggested firing schedule when using Bullseye frit:
Segment | Rate (C/Hr) | Temp (C) | Hold Time |
1 | 165 | 770 | 10 mins |
2 | 999 (AFAP) | 482 | 60 mins |
Made by Colour de Verre.
Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown.
All our moulds are designed for multiple use and with care should last for many firings.