Modelling Wax

Modelling Wax

Sculpture Clay

Sculpture Clay

Silicone with Catalyst

Rating:
80% of 100
£59.60 £49.67
5 in stock
SKU
Z-F009C

A quality silicone moulding compound with long mould life and very low shrinkage. With this moulding material there's no risk of the casting material gripping the mould surface. Easy to mix by hand, with colour coded components giving a visual aid to ensure mixing is adequate. Please see the product files for further information. Silicone 1kg, catalyst 100g.

Please note, due to shipping restrictions we're unable to send this product outside of the EU. 

Instructions for Use:

The mixing ratio for the Silicone is  100:10 (Base : Catalyst) by weight.

Pour the orange Curing Agent on to the white base in its own container and gently mix and fold the two components together avoiding as much air entrapment as possible. As the mixed material becomes more intermixed you can employ more vigour until a uniform "Salmon Pink" colour is obtained. Pay particular attention to the sides and base of container. When you are sure that the mix is uniformly blended, pour the contents into another clean container and re-mix. This is the best way to ensure that the material is thoroughly mixed. You can then pour it to create your mould.

The silicone will take 12-14 hours to fully set.

Write Your Own Review
You're reviewing:Silicone with Catalyst
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
REPSIL_Data_Sheet (76.37 kB)
E20_Catalyst_PSDS (96.47 kB)