Two Colour Cactus Decal 13.3cm x 10cm

Premium waterslide decals which can be used with ceramic, porcelain, fusing glass and enamel. Use these unique designs by Milestone to add stunning detail to your work.  

Once applied, these decals need to be fired in a kiln to 730-800C.  Remember to make sure your kiln is well ventilated up to 535C (1000F). Firing instructions are included with each purchase.  We recommend using a soft silicone rib tool to remove any air pockets when applying these decals.

Size: 13.3 x 10cm 

Each sheet contains 30 potted cactus/succulent plants, the decals are approximately 1.2 x 2cm. This two-tone decal will fire metallic gold and green. 

The metallic decals are not suitable for the Firebox 8, Firebox 8x6 or Firebox 14 models without a vent hole (older models), as you would have to open the lid to vent the kiln and in these models this would disconnect the lid lock and stop the kiln from firing. 

Bullseye Glass Co. also have a video on using these decals on their website, called Milestone Fusible Decals.