Star Mould SS04 (10.5 x 8cm)

Star Mould 8004 (10.5cm x 8cm)

Mould 8043 Double Curve Mould (34 x 41 x 5cm)

Double Curve Mould 8043 (34cm x 41cm x 5cm)

Four-Square Mosaic Mould 8001

100% of 100
£9.70 £8.08
6 in stock
Four Square Mosaic Mould.

Make your own square mosaic tiles with this easy to use mould.

Each square measures 2.5cm x 2.5cm x 0.5cm. Overall mould size 9cm x 9cm. Fits in the Firebox 8 and Paragon SC2 kilns.

Bullseye Code: 8171

We strongly recommend using ZYP Boron Nitride Spray with our casting moulds for the very best results. Primo Primer can also be used. Standard shelf primer is not suitable.

When filling the mould, pile the frit in a pyramid or dome shape so the centre of the mould is filled higher than the edges. This helps the correct flow of glass during firing, lowering the risk of the glass 'grabbing' the mould sides as it fires:

Filling a glass casting mould

Will this mould fit in my kiln?

Firing Schedule:

This schedule is a guideline and you should adjust it to suit your particular kiln, or for different thicknesses of glass:

Segment Rate (C/hr) Temp. Hold
1 222C 677C :30
2 333C 804C :10
3 999 482C 1:00
4 83C 371C :00

Please note that all our moulds are hand-made and therefore the dimensions may vary slightly from those shown. Mould manufacturers allow a tolerance of up to 2cm. 

All our moulds are designed for multiple use and with care should last for many firings.

Write Your Own Review
You're reviewing:Four-Square Mosaic Mould 8001
Your Rating
Customer Questions
No Questions
Did you find what you were looking for?
Small_pod_mould_guide (277.09 kB)
We found other products you might like!